SKIPPER PROPSHARK ANTIFOULING FOR PROPELLERS 750ML A+B
Couldn't load pickup availability
SHARE ON
antifouling paint without biocides, with excellent expansion, scratch resistant, hard and elastic. It is characterized by high slipperiness and non-adhesion, which facilitates surface cleaning, used as a finishing coat in the nautical sector, reduces the attack of marine fouling especially both hard and soft fouling Recommended for propellers where the speed and turbulence generated by the rotation helps to keep the surface clean. Product free of Biocides.
SUPPORT PREPARATION AND APPLICATION CYCLE
Substrates: Aluminum, light alloys and other types of surfaces. The substrate must necessarily be pre-treated, abraded - roughened. Then apply 1 coat of PROPSHARK at the appropriate thickness. A second coat is possible within 1 hour of the first coat. After 2 hours, apply after roughening, otherwise adhesion could be compromised.
| Application: Spreading | Ready to use |
| Application: Spray | Ready to use - max 10% Thinner 203 |
| Application | Dilution |
| Mixture a+b in volume | 100pp Sol. A +50pp Sol. B |
| Mixture a+b by weight | 100pp Sol. A +50pp Sol. B |
| Pot life a+b (20c) | Use mixture within 2-3 hours |
| Brush-roller dilution | ready to use |
| Spray dilution | 10% max if needed |
| Dust-free drying | 30 minutes (20c) |
| Overpainting time | no later than 1 hour the second coat - after sanding |
| Application temperature | Between +10c and +40c |
| Recommended dry thickness | 40 microns per coat |
| Theoretical yield m2/litre | 11-13 (= m2/Kg) |